{"id":2244,"date":"2019-08-11T10:03:54","date_gmt":"2019-08-11T10:03:54","guid":{"rendered":"https:\/\/www.carandclassic.co.uk\/magazine\/?p=2244"},"modified":"2024-09-12T10:24:04","modified_gmt":"2024-09-12T09:24:04","slug":"1981-delorean-dmc12-project-profile","status":"publish","type":"post","link":"https:\/\/www.carandclassic.com\/magazine\/1981-delorean-dmc12-project-profile\/","title":{"rendered":"1981 DeLorean DMC12 – Project Profile"},"content":{"rendered":"

There are few cars that exist today that can capture the imagination quite like a DeLorean DMC12<\/a>. Even if the blockbuster Hollywood movie franchise hadn\u2019t featured the car, it would still be an icon. John DeLorean was a visionary, he was a man with a plan and he was a man with passion. Charming, suave and with a little black book full of all the right celebrities and politicians, John had the clout to play the game. However, he played it too hard, and in the end it was a botched sting by the FBI that brought John and the DeLorean Motor Company down. We covered the full story in great detail here, and as you\u2019ll read, there was more than enough going on to ensure the DeLorean a place in the history books, all without the help of the films. In fact, the movie life of this car is just a small part of what is a fascinating story full of twists, turns, false promises, over-ambition and more.\u00a0<\/span><\/p>\n

What is it?<\/b><\/span><\/p>\n

This is a 1981 DeLorean DMC12<\/a>. It\u2019s special because 1981 was the first year the car was offered (it was available from \u201881 through to \u201883), so if you\u2019re after a DMC12, this is perhaps the purest model you can buy. That said, the car did remain largely unchanged throughout its life. There were changes to the wheels and to the bonnet, but the main structure and overall design of the car remained the same.\u00a0<\/span><\/p>\n

During development the DMC12 ran into huge problems. DeLorean\u2019s<\/a> initial designs for the car were, frankly, terrible. The overall aesthetic was good, but the underpinnings tried to be too clever, and failed in doing so. As such, DeLorean<\/a> had to call in Colin Chapman of Lotus who would go to completely redesign the DMC\u2019s underpinnings to make it a better-driving car. As such, the DMC was given a steel double Y backbone akin to that of the Lotus Esprit.<\/span><\/p>\n

\"DeLorean,<\/p>\n

John DeLorean<\/a> with one of the early prototype cars<\/em><\/p>\n

Thanks to grants from the UK Government, the DeLorean<\/a> factory was setup in Ireland, despite the car being built for the American market. This gave John DeLorean a considerable tax break, as well as furnishing him with a cheap but willing workforce. However, these people had never worked on anything so advanced as a vehicle assembly line, and as such, the build quality of the first batch of cars was shocking. It forced DeLorean to issue several recalls as well as a company-wide training programme to ensure the cars were being built well. The Irish workforce wasn\u2019t bad, in fact, they were dedicated to a fault. It was just a case of them needing training, something DeLorean thought it could skip over.\u00a0<\/span><\/p>\n

The car itself, when all the kinks were ironed out, was a bit of a wet blanket. It looked great – it still does – but it didn\u2019t have the power or handling prowess to match. The 2.8 Peugeot\/Renault V6 was gutless, the automatic transmission was slow and dimwitted, the handling – despite Chapman\u2019s best efforts – left drivers wanting. It was a disaster. But still, it stood for one man\u2019s passion and desire to break free from the pack and try something new, something unique and something brave, and for that you have to love it.<\/span><\/p>\n

\"DeLorean,<\/a><\/p>\n

Why is it a project?\u00a0<\/b><\/span><\/p>\n

From what we can read, it looks like this car is a project for two reasons. Firstly, it\u2019s a fresh import, and secondly, it has some signs of past lives that need to be addressed. In terms of the imports side of things, the car is on the NOVA system, so it just needs an MOT before it can be UK registered and fitted with age appropriate plates. That\u2019s the easy part, especially as the vendor happily states that this DMC12 runs, drives, starts and stops. It may not be too far from an MOT at all. Of course, the lights will need to be changed\/adapted for UK use, the tyres will probably want changing too, but other than that, it could be registered pretty quickly.\u00a0<\/span><\/p>\n

It\u2019s the other stuff that makes it a project. The dash has a crack, which isn\u2019t ideal. The lower flanks have been painted black for some obscure reason, so you\u2019d want to get rid of that. However, the vendor does state that there are some signs of damage, so factor that in. You\u2019re going to need a specialist to sort that, given that one of this car\u2019s unique features was the fact it wasn\u2019t painted. You\u2019re going to need a wizard in the stainless steel arena.\u00a0<\/span><\/p>\n

Other than all that though, this looks like a pretty straightforward project. One that you could sort and have on the road without too much fuss, then do the rest once the car is rolling and driving. Winner.<\/span><\/p>\n

\"DeLorean,<\/a><\/p>\n

Five things you should look for:<\/b><\/span><\/p>\n

 <\/p>\n