Description
ODA type button with M4 brass insert for Delage, Delahaye, Salmson, Peugeot 302 402 and Darl'Mat. - Dashboard button D 27 H 17 mm, M4 brass insert to screw with inscription (D, S, C, G, A, or contact symbol or plain): £18. - AL button (Ignition advance), L 44 w 22 H 15mm to glue: £18. Complete ODA kit: 8 pieces 7 Dashboard buttons D 27 H 17 mm, M4 brass insert to screw with inscription: D, S, C, G, A, + contact symbol + plain button) + 1 AL button (Ignition advance), L 44 w 22 H 15mm to glue: £140. Available in Black bakelite or Straw bakelite colour. Reproduction of original parts for classic vehicles, in ABS resin tinted throughout. Careful light polished finish. Several colours to choose from, including original colours available. Colour No. 1: Beige Colour No. 2: Peugeot Ivory Colour No. 3: Peugeot Grey Colour No. 4: Peugeot Light Grey Colour No. 5: Peugeot Marbled Brown Colour No. 6: Burgundy Colour No. 7: Black bakelite Colour No. 8: Straw bakelite Black or White Note: For gluing buttons, prefer a two-part adhesive: Type 3M DP8425 acrylic glue or Epoxy. Note: For gluing Quillery mouldings, prefer transparent silicone glue. Catalogue link 27-05-2026 - details above Possibility of other parts. Parts manufactured * By Mae*: For 203, (2 models, * diameter 23. 5 or 25 to choose): - Manual advance button 1st model with 2 flats Internal diameter 6 mm: £11. - Manual advance button 2nd model Internal diameter 8 mm + ears: £11. - Manual advance button for Salmson A or R (only in D 23. 5): £11. - Plain dashboard buttons with M4 brass insert: £11. - Dashboard buttons with inscription (D-S-EG and contact symbol) M4 brass insert to screw. - Crank ring D internal 25. 5mm D external 49: £8. - Roof vent deflector in polyester for 203 Peugeot perfect copy in polyester. Length 86 cm New refabrication: £120. For 203 or 403. - Armrest: £98. - Armrest + Plate for bearing refurbishment: £108. - Gear lever knob 1st model, D: 26 H: 32mm. 9. 5 mm drilling to glue: £22. - Gear lever knob 2nd model, D: 30 H: 35mm. 9. 5 mm drilling to glue: £26. - Light/ horn stalk end, D: 18 H: 30mm. 6. 5 mm drilling to glue: £18. - Bracket/ Support for interior door straps 50mm centre distance D. 4mm: £8. - Window winder handle button D 19 mm drilling 5. 5 mm to glue: £5. - Door lock rod button D 10mm to screw M3: £5. - Parking reversing ball D 10mm to screw M3: £5. - Small button (6 ears) switch D: 14mm H: 11mm to screw M4: £9. - Terminal block/ Rear light connection plate (grey semi-flexible resin) + 3 knurled M4 nuts (colour to choice): £36. - Terminal block/ Plate (grey semi-flexible resin) holds 4 fuses + 4 knurled M5 nuts (colour to choice): £38. - Indicator lever/ stalk (bare) same as JAEGER Ref: 68435. Choice of square or round axial cage: £28. D 10mm The part has a 2-stage hole to allow centring of the 3mm drill bit to be used if needed. Please specify the model you need. Don't forget to check your stalk carefully (these are not suitable for 203 with arrows or 403 with arrows). For 403. Description of dashboard buttons: D 25 H 25mm. Drilling D 4 or 6mm to glue. - Button (EV) D. 4mm to glue: £10. - Button (AC, AS or AIR) D. 4mm to glue: £10. - Button (Contact) D. 6mm to glue: £10. - Button (Starter) D. 6mm to glue: £10. - Button (Plain) D. 4mm to glue £10. - Button (Plain) D. 6mm to glue £10. - Windscreen washer button type D 12. 5mm to screw 4 x 75: £9. - Ventilation grille button D 1mm to screw 5 x 90: £8. - Crank ring D. internal 25. 5 external 49mm: £8. - Interior door lock pull D 14 H 43mm to screw M3: £10. KITS Dashboard kit 7 buttons 203. 1 Manual advance button to glue + 3 Plain dashboard buttons with M4 insert + 4 Dashboard buttons with inscription (D-S-EG or contact symbol) M4 insert: £68. Door kit 203. 8 Rings + 4 Crank knobs (to glue) + 4 Lock buttons (M3 thread) + 4 Strap supports: £92. Convertible kit 203: 19 pieces 1 Manual advance button to glue (to choice) + 3 Plain dashboard buttons with M4 brass insert + 4 Dashboard buttons with inscription (D-S-EG or contact symbol) M4 brass insert + 1 Parking reversing ball to screw M3 + 2 Window winder handle buttons to glue + 2 Door lock rod buttons to screw M3 + 4 Crank rings + 2 Interior strap supports: £142. Convertible kit 203: 19 pieces 1 Manual advance button to glue (to choice) + 3 Plain dashboard buttons with M4 brass insert + 4 Dashboard buttons with inscription (D-S-EG or contact symbol) M4 brass insert + 1 Parking reversing ball to screw M3 + 2 Window winder handle buttons to glue + 2 Door lock rod buttons to screw M3 + 4 Crank rings + 2 Interior strap supports...
