Description
Indicator stalk / lever (bare) same as JAEGER Ref: 68435. Choice of square or round axial cage: £28. On the lever with the square axial cage, there are 2 possibilities for "contact hammer", in 2mm or 3mm diameter. The part has a 2-stage hole to allow centring of the 3mm drill bit to be used if needed. Please check your lever carefully, they do not suit all 203s. Reproduction of original parts for classic vehicles, in ABS resin tinted throughout. Careful light polished finish. Several colours to choose from, including original colours available. Colour No. 1: Beige Colour No. 2: Peugeot Ivory Colour No. 3: Peugeot Grey Colour No. 4: Peugeot Light Grey Colour No. 5: Peugeot Iced Brown Colour No. 6: Burgundy Colour No. 7: Bakelite Black Colour No. 8: Bakelite Strand Black or White Ps: For gluing buttons, prefer a two-part adhesive: Type 3M DP8425 acrylic glue or Epoxy. Ps: For gluing Quillery trim strips, prefer transparent silicone glue. Catalogue link 27-05-2026 - details above Possibility of other parts. Parts manufactured in France in the 06 * By Mae*: For 203, (2 models, * diameter 23. 5 or 25 to choose): - Manual advance button 1st model with 2 flats Internal diameter 6 mm: £11. - Manual advance button 2nd model Internal diameter 8 mm + ears: £11. - Manual advance button for Salmson A or R (only in D 23. 5): £11. - Dashboard buttons simple brass insert M4: £11. - Dashboard buttons with inscription (D-S-EG and contact symbol) brass insert M4 to screw. - Crank ring D internal 25. 5mm D external 49: £8. - Sunroof deflector in polyester for 203 Peugeot perfect copy in polyester. Length 86 cm New refabrication: £120. For 203 or 403. - Armrest: £98. - Armrest + plate for bearing refurbishment: £108. - Gear lever knob 1st model, D: 26 H: 32mm. 9. 5 mm drilling to glue: £22. - Gear lever knob 2nd model, D: 30 H: 35mm. 9. 5 mm drilling to glue: £26. - Stalk end for light/ horn control, D: 18 H: 30mm. 6. 5 mm drilling to glue: £18. - Bracket / support for interior door straps 50mm centre distance D. 4mm: £8. - Window winder handle button D 19 mm drilling 5. 5 mm to glue: £5. - Door lock rod button D 10mm to screw M3: £5. - Parking inverter ball D 10mm to screw M3: £5. - Small button (6 ears) for switch D: 14mm H: 11mm to screw M4: £9. - Terminal block / rear light connection plate (grey semi-flexible resin) + 3 knurled nuts M4 (colour to choice): £36. - Terminal block / plate (grey semi-flexible resin) holds 4 fuses + 4 knurled nuts M5 (colour to choice): £38. - Indicator stalk / lever (bare) same as JAEGER Ref: 68435. Choice of square or round axial cage: £28. D 10mm The part has a 2-stage hole to allow centring of the 3mm drill bit to be used if needed. Please specify the model you need. Don't forget to check your lever carefully, (these do not suit the 203 with arrows or the 403 with arrows). For 403. Description of dashboard buttons: D 25 H 25mm. D drilling 4 or 6mm to glue. - Button (EV) D. 4mm to glue: £10. - Button (AC, AS or AIR) D. 4mm to glue: £10. - Button (Contact) D. 6mm to glue: £10. - Button (Starter) D. 6mm to glue: £10. - Button (Simple) D. 4mm to glue £10. - Button (Simple) D. 6mm to glue £10. - Windscreen washer type buttons D 12. 5mm to screw 4 x 75: £9. - Ventilation grille button D 1mm to screw 5 x 90: £8. - Crank ring D. internal 25. 5 external 49mm: £8. - Interior door lock pull D 14 H 43mm to screw M3: £10. KITS Dashboard kit 7 buttons 203. 1 Manual advance button to glue + 3 Simple dashboard buttons brass insert M4 + 4 Dashboard buttons with inscription (D-S-EG or contact symbol) brass insert M4: £68. Door kit 203. 8 rings + 4 Crank handle buttons (to glue) + 4 Lock buttons (M3 thread) + 4 Strap supports: £92. Cabriolet kit 203: 19 parts 1 Manual advance button to glue (to choice) + 3 Simple dashboard buttons brass insert M4 + 4 Dashboard buttons with inscription (D-S-EG or contact symbol) brass insert M4 + 1 Parking inverter ball to screw M3 + 2 Window winder handle buttons to glue + 2 Door lock rod buttons to screw M3 + 4 Crank rings + 2 Interior strap supports: £142. Cabriolet kit 203: 19 parts 1 Manual advance button to glue (to choice) + 3 Simple dashboard buttons brass insert M4 + 4 Dashboard buttons with inscription (D-S-EG or contact symbol) brass insert M4 + 1 Parking inverter ball to screw M3 + 2 Window winder handle buttons to glue + 2 Door lock rod buttons to screw M3 + 4 Crank rings + 2 Interior strap supports: £142...
