Description
Stalk end cap for lights/ horn controls, D: 18 H: 30mm. 6. 5mm drilling for gluing: €18. Reproduction original parts for classic vehicles, in solid-colour ABS resin. Carefully finished with light polish. Several colours to choose from, including original colours available. Colour No. 1: Beige Colour No. 2: Peugeot Ivory Colour No. 3: Peugeot Grey Colour No. 4: Peugeot Light Grey Colour No. 5: Peugeot Chestnut Colour No. 6: Burgundy Colour No. 7: Bakelite Black Colour No. 8: Bakelite Strand Black or White Ps: For gluing buttons, prefer a two-part adhesive: Type 3M DP8425 acrylic adhesive or Epoxy. Ps: For gluing Quillery trim strips, prefer transparent silicone adhesive. Catalogue link 27-05-2026 - details above Possibility of other parts. Parts manufactured in France in the 06 * By Mae*: For 203, (2 models, * diameter 23. 5 or 25 to choose from): - Manual advance button 1st model with 2 flats Internal diameter 6mm: €11. - Manual advance button 2nd model Internal diameter 8mm + ears: €11. - Manual advance button for Salmson A or R (only in D 23. 5): €11. - Simple dashboard buttons brass insert M4: €11. - Dashboard buttons with inscription (D-S-EG and contact symbol) brass insert M4 to screw. - Crank ring D internal 25. 5mm D external 49: €8. - Sunroof deflector in polyester for 203 Peugeot perfect copy in polyester. Length 86cm New refurbishment: €120. For 203 or 403. - Armrest: €98. - Armrest + plate for cushion refurbishment: €108. - Gear lever knob 1st model, D: 26 H: 32mm. 9. 5mm drilling for gluing: €22. - Gear lever knob 2nd model, D: 30 H: 35mm. 9. 5mm drilling for gluing: €26. - Stalk end cap for lights/ horn controls, D: 18 H: 30mm. 6. 5mm drilling for gluing: €18. - Bracket/ support for interior door straps 50mm centre distance D. 4mm: €8. - Window winder handle button D 19mm drilling 5. 5mm for gluing: €5. - Door lock rod button D 10mm to screw M3: €5. - Parking inverter ball D 10mm to screw M3: €5 - Small button (6 ears) for switch D: 14mm H: 11mm to screw M4: €9 - Terminal block/ rear light connection plate (semi-flexible grey resin) + 3 knurled nuts M4 (colour to choose): €36. - Terminal block/ plate (semi-flexible grey resin) holds 4 fuses + 4 knurled nuts M5 (colour to choose): €38. - Indicator lever/ stalk (bare) same as JAEGER Ref: 68435. Choice of square or round axial cage: €28. D 10mm The part has a 2-stage hole to allow centring of the 3mm drill bit to be used if needed. Please specify the model you need. Don't forget to check your stalk carefully (these are not suitable for 203 with arrows or 403 with arrows). For 403. Description of dashboard buttons: D 25 H 25mm. Drilling D 4 or 6mm for gluing. - Button (EV) D. 4mm for gluing: €10 - Button (AC, AS or AIR) D. 4mm for gluing: €10 - Button (Contact) D. 6mm for gluing: €10 - Button (Starter) D. 6mm for gluing: €10 - Button (Simple) D. 4mm for gluing €10 - Button (Simple) D. 6mm for gluing €10 - Windscreen washer type buttons D 12. 5mm to screw 4 x 75: €9 - Ventilation grille button D 1mm to screw 5 x 90: €8 - Crank ring D. internal 25. 5 external 49mm: €8. - Interior door lock pull D 14 H 43mm to screw M3: €10 KITS Dashboard kit 7 buttons 203. 1 Manual advance button for gluing + 3 Simple dashboard buttons brass insert M4 + 4 Dashboard buttons with inscription (D-S-EG or contact symbol) M4 insert: €68 Door kit 203. 8 rings + 4 Crank handle buttons (for gluing) + 4 Lock buttons (M3 thread) + 4 Strap supports: €92. Convertible kit 203: 19 parts 1 Manual advance button for gluing (to choose) + 3 Simple dashboard buttons brass insert M4 + 4 Dashboard buttons with inscription (D-S-EG or contact symbol) brass insert M4 + 1 Parking inverter ball to screw M3 + 2 Window winder handle buttons for gluing + 2 Door lock rod buttons to screw M3 + 4 Crank rings + 2 Interior strap supports: €142. Convertible kit 203: 19 parts 1 Manual advance button for gluing (to choose) + 3 Simple dashboard buttons brass insert M4 + 4 Dashboard buttons with inscription (D-S-EG or contact symbol) brass insert M4 + 1 Parking inverter ball to screw M3 + 2 Window winder handle buttons for gluing + 2 Door lock rod buttons to screw M3 + 4 Crank rings + 2 Interior strap supports: €142. Kit 203: 26 parts 1 Manual advance button for gluing + 3 Simple dashboard buttons brass insert M4 + 4 Dashboard buttons with inscription (D-S-EG and contact symbol) M4 insert + 4 Window winder handle buttons for gluing + 4 Door lock rod buttons to screw M3 + 1 Parking inverter ball to screw...
