Description
1974 PORSCHE 911 S 2. 7 - FOR RECOMMISSIONINGThe 1974 Porsche 911 S 2. 7 marked a significant shift in the 911's evolution, introducing the 'G-Series' body style with prominent impact bumpers to meet US safety regulations. It served as the mid-range offering between the base 911 and the high-performance Carrera. It boasted the 2. 7-litre air-cooled flat-six with Bosch K-Jetronic (CIS) fuel injection. Power Output: 175 bhp (130 kW) at 5, 800 rpm. Torque: Approximately 173 ft-lbs at 3, 800 rpm. Transmission: Standard four-speed manual (Type 915/ 16), with a five-speed (Type 915/ 06) or Sportomatic available as options. Acceleration (0–60 mph): Approximately 7. 5 seconds. Top Speed: 130 mph (210 km/ h). The newly added 'bellows' bumpers were introduced to absorb low-speed impacts, an elegant solution compared to competitors of the era. Sitting on 15-inch forged aluminium Fuchs , with 6x15-inch versions common on the S model. It was available as both a Coupe and a Targa. The 1974 model was the last 911 S to feature chrome-plated exterior mirrors, window surrounds, and door handles before moving to black or body-coloured finishes. This example has been off the road since 2020 and has been dry stored since. It was subject to an MOT test in September 2023 where a number of defects and advisories were identified. As a result, it had been subject to some floor pan welding and other works in order to make the vehicle safe and driveable.* removal of aftermarket immobiliser and wiring* strip and clean brake calipers, replace rear brake pads and unseize, adjust and lubricate handbrake cable* replace all brake Flexi hoses, bleed brake system and replace brake fluid* strip and clean fuel injection system and replace all perished fuel hoses* strip and clean front brake calipers* clean and remove rusted area on floor pan, fabricate new metal piece to fit and weld in the affected area, finished with seam sealer and undercoat in black, clean off other rusty areas and coated with protective undercoatFurther recommissioning works may be necessary in order to bring the vehicle up to standard despite the fact it is MOT exempt. The vehicle starts and drives. The bodywork is generally good with some age related imperfections and a few lower door rust patches as to be expected. The interior is clean with a little wear to the driver seat. With a limited production runner only 1359 Coupés manufactured in 1974, it is likely that less than 100 exist in the UK now from 1974This car therefore represents a fantastic opportunity to buy a vehicle that is currently running and driving but can be taken to the next level and offered with an extremely attractive estimate of just £12, 000-£15, 000. This vehicle is located near St Albans, Hertfordshire from where it will need to be collected. Motorscan report and videos available on request. Viewing is by appointment, please contact the office to arrange.
